www.thetkrguy.com
Re-conditioned Repeaters and Options
* Used Re-conditioned TKR-820 (when available), 440-450mhz; 90 day warranty, FOB.
With internal power supply; professionally programmed and aligned to your frequencies.
$340.00 without duplexer: plus shipping and insurance
NOTE: I program using a Kenwood mfgrd KPT programmer. I do not install an eeprom socket, as I don't need to
remove the original eeprom when programming via the official factory method.Options:
CTCSS encode/decode/or both$20.00
DTMF-TTG repeat function controller; allows disabling and enabling via DTMF
$79.00 ($49 for the module... $30.00 for installation)
Internal Duplexer - used (when available) tuned to your frequencies. A duplexer allows the repeaters two independant radios (the receiver and transmitter radios that are operating simultaneously ) to use a single antenna.
$95.00
Internal Duplexer - new; tuned to your frequencies
$195.00
Dual Power functionality. Kenwood had offered a battery backup connection option for the TKR-720/820. This allowed the repeater to operate off both the internal powersupply... and an external battery. Although they no longer offer the option, I can install it. The repeater will function exactly as the factory dual power option allowed. NOTE: this is an internally installed option, and am unable to sell a field upgrade kit; after the fact.
$45.00
ACCESSORY INTERFACE KIT to add a CW ID-er. One 15 pin male connector shell & 10 male pins - that mate to the TKR-720/820 rear accessory connector. Also includes my Accessory Interface Sheet which identifies the signals available there.
$15.00Install eeprom socket. Strictly optional, as it's not necessary for the factory method of programming.
$45.00
to order, email John - mentioning what you are wanting; he'll reply with availability and a total price.
Note: I only ship whole repeaters to a US state address, no exceptions. If you're just purchasing an accessory (and not an entire repeater) I can relax this a bit.
* Used Re-conditioned TKR-720 (when available), 144-150mhz: 90 day warranty, FOB.
With internal power supply; professionally programmed and aligned to your frequencies.
$379.00 without duplexer: plus shipping and insurance
NOTE: I program using a Kenwood mfgrd KPT programmer. I do not install an eeprom socket, as I don't need to
remove the original eeprom when programming via the official factory method.Options:
CTCSS encode/decode/or both$20.00
DTMF-TTG repeat function controller; allows disabling and enabling via DTMF
$79.00 ($49 for the module... $30 for installation)
Internal Duplexer
N/A
Dual Power functionality. Kenwood had offered a battery backup connection option for the TKR-720/820. This allowed the repeater to operate off both the internal powersupply... and an external battery. Although they no longer offer the option, I can install it. The repeater will function exactly as the factory dual power option allowed. NOTE: this is an internally installed option, and am unable to sell a field upgrade kit; after the fact.
$45.00
ACCESSORY INTERFACE KIT to add a CW ID-er. One 15 pin male connector shell & 10 male pins - that mate to the TKR-720/820 rear accessory connector. Also includes my Accessory Interface Sheet which identifies the signals available there.
$15.00Install eeprom socket. Strictly optional, as it's not necessary for the factory method of programming.
$59.00
to order, email John - mentioning what you are wanting, he'll reply with availability and a total price; and then will send a PayPal invoice.
Note: I only ship whole repeaters to a US state address, no exceptions. If you're just purchasing an accessory (and not an entire repeater) I can relax this a bit.